dmesg - Multicore Suite Run 1

Return To Multicore Suite Run 1 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-77-generic (buildd@lcy01-30) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #121-Ubuntu SMP Wed Jan 20 10:50:42 UTC 2016 (Ubuntu 3.13.0-77.121-generic 3.13.11-ckt32)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cbc3dfff] usable
BIOS-e820: [mem 0x00000000cbc3e000-0x00000000cc65cfff] reserved
BIOS-e820: [mem 0x00000000cc65d000-0x00000000cc919fff] usable
BIOS-e820: [mem 0x00000000cc91a000-0x00000000cc9d2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cc9d3000-0x00000000cdec0fff] reserved
BIOS-e820: [mem 0x00000000cdec1000-0x00000000cdec1fff] usable
BIOS-e820: [mem 0x00000000cdec2000-0x00000000ce0c7fff] ACPI NVS
BIOS-e820: [mem 0x00000000ce0c8000-0x00000000ce21efff] usable
BIOS-e820: [mem 0x00000000ce21f000-0x00000000ce83bfff] reserved
BIOS-e820: [mem 0x00000000ce83c000-0x00000000ce86ffff] usable
BIOS-e820: [mem 0x00000000ce870000-0x00000000ceff0fff] reserved
BIOS-e820: [mem 0x00000000ceff1000-0x00000000ceffffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001eeffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: BIOSTAR Group Hi-Fi A70U3P/Hi-Fi A70U3P, BIOS 4.6.5 10/29/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1ef000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000022f000000 aka 8944M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x1eee00000-0x1eeffffff]
 [mem 0x1eee00000-0x1eeffffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x1ec000000-0x1eedfffff]
 [mem 0x1ec000000-0x1eedfffff] page 2M
init_memory_mapping: [mem 0x180000000-0x1ebffffff]
 [mem 0x180000000-0x1bfffffff] page 1G
 [mem 0x1c0000000-0x1ebffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcbc3dfff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xcbbfffff] page 2M
 [mem 0xcbc00000-0xcbc3dfff] page 4k
init_memory_mapping: [mem 0xcc65d000-0xcc919fff]
 [mem 0xcc65d000-0xcc919fff] page 4k
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0xcdec1000-0xcdec1fff]
 [mem 0xcdec1000-0xcdec1fff] page 4k
init_memory_mapping: [mem 0xce0c8000-0xce21efff]
 [mem 0xce0c8000-0xce21efff] page 4k
init_memory_mapping: [mem 0xce83c000-0xce86ffff]
 [mem 0xce83c000-0xce86ffff] page 4k
init_memory_mapping: [mem 0xceff1000-0xceffffff]
 [mem 0xceff1000-0xceffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x17fffffff]
 [mem 0x100000000-0x17fffffff] page 1G
RAMDISK: [mem 0x35b40000-0x36d97fff]
ACPI: RSDP 00000000000f04a0 000024 (v02 ALASKA)
ACPI: XSDT 00000000cc99e080 00007C (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 00000000cc9a3060 00010C (v05 ALASKA    A M I 01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
ACPI: DSDT 00000000cc99e190 004ECC (v02 ALASKA    A M I 00000000 INTL 20051117)
ACPI: FACS 00000000cc9c9d80 000040
ACPI: APIC 00000000cc9a3170 00007E (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FPDT 00000000cc9a31f0 000044 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FIDT 00000000cc9a3238 00009C (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 00000000cc9a32d8 00003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000cc9a3318 000038 (v01 ALASKA    A M I 01072009 AMI  00000005)
ACPI: UEFI 00000000cc9a3350 000042 (v01 ALASKA    A M I 01072009      00000000)
ACPI: SSDT 00000000cc9a3398 000B9C (v01    AMD BANTRY   00000001 AMD  00000001)
ACPI: SSDT 00000000cc9a3f38 00033B (v02    AMD BANTRY   00000002 MSFT 04000000)
ACPI: CRAT 00000000cc9a4278 000550 (v01    AMD BANTRY   00000001 AMD  00000001)
ACPI: SSDT 00000000cc9a47c8 00122C (v01    AMD   CPMCMN 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001eeffffff]
Initmem setup node 0 [mem 0x00000000-0x1eeffffff]
  NODE_DATA [mem 0x1eeff4000-0x1eeff8fff]
 [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff8801e7600000-ffff8801ee5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x1eeffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0xcbc3dfff]
  node   0: [mem 0xcc65d000-0xcc919fff]
  node   0: [mem 0xcdec1000-0xcdec1fff]
  node   0: [mem 0xce0c8000-0xce21efff]
  node   0: [mem 0xce83c000-0xce86ffff]
  node   0: [mem 0xceff1000-0xceffffff]
  node   0: [mem 0x100000000-0x1eeffffff]
On node 0 totalpages: 1814580
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 12995 pages used for memmap
  DMA32 zone: 831638 pages, LIFO batch:31
  Normal zone: 15296 pages used for memmap
  Normal zone: 978944 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcbc3e000-0xcc65cfff]
PM: Registered nosave memory: [mem 0xcc91a000-0xcc9d2fff]
PM: Registered nosave memory: [mem 0xcc9d3000-0xcdec0fff]
PM: Registered nosave memory: [mem 0xcdec2000-0xce0c7fff]
PM: Registered nosave memory: [mem 0xce21f000-0xce83bfff]
PM: Registered nosave memory: [mem 0xce870000-0xceff0fff]
PM: Registered nosave memory: [mem 0xcf000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcf000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff8801eec00000 s81536 r8192 d20864 u524288
pcpu-alloc: s81536 r8192 d20864 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1786204
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c0000000
PM: Registered nosave memory: [mem 0xc0000000-0xc3ffffff]
Memory: 6976156K/7258320K available (7400K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 282164K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:1024 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 29360128 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3094.038 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6188.07 BogoMIPS (lpj=12376152)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00cf000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28601 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A8-7600 Radeon R7, 10 Compute Cores 4C+6G (fam: 15, model: 30, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24752.30 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcc91a000-0xcc9d2fff] (757760 bytes)
PM: Registering ACPI NVS region [mem 0xcdec2000-0xce0c7fff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 12:24:04, date: 03/24/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:01.0: [1002:1313] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xe0000000-0xe07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io  0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb71000-0xfeb717ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb70000-0xfeb70fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb6f000-0xfeb6f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: PME# supported from D0 D3hot D3cold
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xe0a00000-0xe0a03fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.1:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1:   bridge window [mem 0xe0a00000-0xe0afffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xfe900000-0xfe900fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xe0900000-0xe0903fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.0:   bridge window [mem 0xe0900000-0xe09fffff 64bit pref]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io  0xc000-0xc0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfe800000-0xfe800fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xe0800000-0xe0803fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:00:15.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:15.1:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:15.1:   bridge window [mem 0xe0800000-0xe08fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 7 9 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcbc3e000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcc91a000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcdec2000-0xcfffffff]
e820: reserve RAM buffer [mem 0xce21f000-0xcfffffff]
e820: reserve RAM buffer [mem 0xce870000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x1ef000000-0x1efffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x90000000-0xcfffffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io  0x0a00-0x0a1f] has been reserved
system 00:03: [io  0x0a20-0x0a2f] has been reserved
system 00:03: [io  0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [io  0x04d0-0x04d1] has been reserved
system 00:0b: [io  0x040b] has been reserved
system 00:0b: [io  0x04d6] has been reserved
system 00:0b: [io  0x0c00-0x0c01] has been reserved
system 00:0b: [io  0x0c14] has been reserved
system 00:0b: [io  0x0c50-0x0c51] has been reserved
system 00:0b: [io  0x0c52] has been reserved
system 00:0b: [io  0x0c6c] has been reserved
system 00:0b: [io  0x0c6f] has been reserved
system 00:0b: [io  0x0cd0-0x0cd1] has been reserved
system 00:0b: [io  0x0cd2-0x0cd3] has been reserved
system 00:0b: [io  0x0cd4-0x0cd5] has been reserved
system 00:0b: [io  0x0cd6-0x0cd7] has been reserved
system 00:0b: [io  0x0cd8-0x0cdf] has been reserved
system 00:0b: [io  0x0800-0x089f] could not be reserved
system 00:0b: [io  0x0b20-0x0b3f] has been reserved
system 00:0b: [io  0x0900-0x090f] has been reserved
system 00:0b: [io  0x0910-0x091f] has been reserved
system 00:0b: [io  0xfe00-0xfefe] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:0b: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.1:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1:   bridge window [mem 0xe0a00000-0xe0afffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.0:   bridge window [mem 0xe0900000-0xe09fffff 64bit pref]
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:00:15.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:15.1:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:15.1:   bridge window [mem 0xe0800000-0xe08fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xe0a00000-0xe0afffff 64bit pref]
pci_bus 0000:02: resource 4 [io  0x0000-0x03af]
pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:02: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:02: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:02: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 2 [mem 0xe0900000-0xe09fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 2 [mem 0xe0800000-0xe08fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18784K (ffff880035b40000 - ffff880036d98000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc7c3e000-0xcbc3e000] (64MB) mapped at [ffff8800c7c3e000-ffff8800cbc3dfff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
microcode: CPU0: patch_level=0x06003106
microcode: CPU1: patch_level=0x06003106
microcode: CPU2: patch_level=0x06003106
microcode: CPU3: patch_level=0x06003106
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1458822244.868:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 13662
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (29 C)
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6f000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-77-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6d000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-77-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb70000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-77-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6e000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-77-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb6c000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-77-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-77-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-77-generic xhci_hcd
usb usb7: SerialNumber: 0000:00:10.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
xhci_hcd 0000:00:10.1: irq 77 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 78 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 79 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 80 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 81 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-77-generic xhci_hcd
usb usb8: SerialNumber: 0000:00:10.1
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.13.0-77-generic xhci_hcd
usb usb9: SerialNumber: 0000:00:10.1
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: d961bd20e8ac66643fc6dc2d56668f426e33e88f'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 8:431:431
rtc_cmos 00:05: setting system clock to 2016-03-24 12:24:05 UTC (1458822245)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 780K (ffff88000173d000 - ffff880001800000)
Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
systemd-udevd[115]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:11.0: version 3.0
r8169 0000:01:00.0: irq 82 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc90000c60000, f4:f2:6d:06:b1:32, XID 0c200000 IRQ 82
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 83 for MSI/MSI-X
r8169 0000:03:00.0 eth1: RTL8168e/8111e at 0xffffc90004e48000, f4:f2:6d:06:e6:30, XID 0c200000 IRQ 83
r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71100 irq 19
ata2: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71180 irq 19
ata3: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71200 irq 19
ata4: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71280 irq 19
r8169 0000:04:00.0: irq 84 for MSI/MSI-X
r8169 0000:04:00.0 eth2: RTL8168g/8111g at 0xffffc90004e4a000, b8:97:5a:b3:fe:77, XID 0c000800 IRQ 84
r8169 0000:04:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-8: WDC WD5003ABYZ-011FA0, 01.01S03, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5003ABYZ-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00B 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
tsc: Refined TSC clocksource calibration: 3094.217 MHz
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 >
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 4-1: new full-speed USB device number 2 using ohci-pci
usb 4-1: New USB device found, idVendor=046d, idProduct=c52b
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Receiver
usb 4-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-1/input2
input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input5
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.0-1:1
usb 3-5: new full-speed USB device number 2 using ohci-pci
usb 3-5: New USB device found, idVendor=046d, idProduct=c52b
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Receiver
usb 3-5: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0007: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input2
input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:12.0/usb3/3-5/3-5:1.2/0003:046D:C52B.0007/input/input6
logitech-djdevice 0003:046D:C52B.0008: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:12.0-5:2
usb 9-1: new SuperSpeed USB device number 2 using xhci_hcd
random: nonblocking pool is initialized
usb 9-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
usb 9-1: New USB device found, idVendor=174c, idProduct=55aa
usb 9-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 9-1: Product: Silicon-Power
usb 9-1: Manufacturer: PHD 3.0
usb 9-1: SerialNumber: 201212SK0582103#0174
usb-storage 9-1:1.0: USB Mass Storage device detected
usb-storage 9-1:1.0: Quirks match for vid 174c pid 55aa: 400000
scsi4 : usb-storage 9-1:1.0
usbcore: registered new interface driver usb-storage
Switched to clocksource tsc
scsi 4:0:0:0: Direct-Access     PHD 3.0  Silicon-Power    2AR1 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdc] No Caching mode page found
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] No Caching mode page found
sd 4:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 >
sd 4:0:0:0: [sdc] No Caching mode page found
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc11): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
systemd-udevd[294]: starting version 204
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI Error: [AFN7] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCD_._BCM] (Node ffff8801e44b4ca8), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: Evaluating _BCM failed (20131115/video-383)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input7
ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
ACPI Error: [AFN7] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB21.VGA_.LCD_._BCM] (Node ffff8801e44b9c30), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: Evaluating _BCM failed (20131115/video-383)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1b/LNXVIDEO:01/input/input8
lp: driver loaded but no devices found
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
MCE: In-kernel MCE decoding enabled.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
it87: Found IT8721F chip at 0xa30, revision 1
it87: Beeping is supported
ACPI Warning: 0x0000000000000a35-0x0000000000000a36 SystemIO conflicts with Region \SENP 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
EDAC MC: Ver: 3.0.0
[drm] Initialized drm 1.1.0 20060810
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
systemd-udevd[317]: renamed network interface eth0 to eth61
ppdev: user-space parallel port driver
type=1400 audit(1458822270.782:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=415 comm="apparmor_parser"
type=1400 audit(1458822270.782:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=415 comm="apparmor_parser"
type=1400 audit(1458822270.782:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=415 comm="apparmor_parser"
type=1400 audit(1458822270.782:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=415 comm="apparmor_parser"
type=1400 audit(1458822270.782:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=415 comm="apparmor_parser"
type=1400 audit(1458822270.782:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=415 comm="apparmor_parser"
systemd-udevd[322]: renamed network interface eth1 to eth62
systemd-udevd[324]: renamed network interface eth2 to eth63
hda-intel 0000:00:01.1: Using LPIB position fix
snd_hda_intel 0000:00:01.1: irq 85 for MSI/MSI-X
hda-intel 0000:00:01.1: Enable sync_write for stable communication
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
[drm] radeon kernel modesetting enabled.
SKU: Nid=0x1d sku_cfg=0x4004c601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000004
SKU: customization=0x000000c6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   inputs:
     Front Mic=0x19
     Rear Mic=0x18
     Line=0x1a
realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0662
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[drm] initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1565:0x1708).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xE0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: 113
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 3498884 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading KAVERI Microcode
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800be000c00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8800be000c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8800be000c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800be000c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8800be000c10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90005136c98
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 86 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 4 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] Enabling audio 2 support
[drm] Enabling audio 3 support
[drm] Enabling audio 4 support
[drm] Enabling audio 5 support
[drm] Enabling audio 6 support
[drm] ib test on ring 0 succeeded in 0 usecs
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
[drm] ib test on ring 1 succeeded in 0 usecs
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   HDMI-A-1
[drm]   HPD3
[drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   VGA-1
[drm]   HPD1
[drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_UNIPHY
[drm]     CRT1: NUTMEG
[drm] Connector 2:
[drm]   HDMI-A-2
[drm]   HPD2
[drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY3
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
[drm] fb mappable at 0xD1488000
[drm] vram apper at 0xD0000000
[drm] size 9216000
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
EXT4-fs (sdc11): re-mounted. Opts: errors=remount-ro
init: failsafe main process (699) killed by TERM signal
type=1400 audit(1458822275.822:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=833 comm="apparmor_parser"
type=1400 audit(1458822275.822:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=833 comm="apparmor_parser"
type=1400 audit(1458822275.826:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=833 comm="apparmor_parser"
type=1400 audit(1458822275.962:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=849 comm="apparmor_parser"
type=1400 audit(1458822275.962:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=849 comm="apparmor_parser"
type=1400 audit(1458822275.962:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=853 comm="apparmor_parser"
type=1400 audit(1458822275.962:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=849 comm="apparmor_parser"
type=1400 audit(1458822275.966:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=854 comm="apparmor_parser"
type=1400 audit(1458822275.966:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=854 comm="apparmor_parser"
type=1400 audit(1458822275.966:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=854 comm="apparmor_parser"
init: cups main process (840) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: nvidia-prime main process (968) terminated with status 127
init: alsa-restore main process (998) terminated with status 99
r8169 0000:01:00.0 eth61: link down
r8169 0000:01:00.0 eth61: link down
IPv6: ADDRCONF(NETDEV_UP): eth61: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth61: link is not ready
r8169 0000:03:00.0 eth62: link down
r8169 0000:03:00.0 eth62: link down
IPv6: ADDRCONF(NETDEV_UP): eth62: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth62: link is not ready
r8169 0000:04:00.0 eth63: link down
r8169 0000:04:00.0 eth63: link down
IPv6: ADDRCONF(NETDEV_UP): eth63: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth63: link is not ready
r8169 0000:01:00.0 eth61: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth61: link becomes ready
r8169 0000:03:00.0 eth62: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth62: link becomes ready
r8169 0000:04:00.0 eth63: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth63: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
audit_printk_skb: 87 callbacks suppressed
type=1400 audit(1458796576.283:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2250 comm="apparmor_parser"
type=1400 audit(1458796576.283:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2250 comm="apparmor_parser"
type=1400 audit(1458796576.283:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2250 comm="apparmor_parser"
init: mountall main process (202) terminated with status 1
init: upstart-udev-bridge main process (289) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (513) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (783) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: plymouth-stop pre-start process (9398) terminated with status 1
init: upstart-udev-bridge main process (9401) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (9410) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (9423) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: systemd-logind main process (897) killed by TERM signal
init: irqbalance main process (1067) killed by TERM signal
systemd-udevd[24052]: starting version 204
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
xor: automatically using best checksumming function:
   avx       :  3974.000 MB/sec
raid6: sse2x1    2790 MB/s
raid6: sse2x2    3957 MB/s
raid6: sse2x4    4571 MB/s
raid6: using algorithm sse2x4 (4571 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab  at 1
Btrfs loaded
type=1400 audit(1458796848.851:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=6261 comm="apparmor_parser"
type=1400 audit(1458796848.851:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6261 comm="apparmor_parser"
type=1400 audit(1458796848.851:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6261 comm="apparmor_parser"
type=1400 audit(1458798030.591:53): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=19545 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458798030.591:54): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=19545 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
traps: stream-bin[19996] trap invalid opcode ip:401dec sp:7fffbb79ab30 error:0 in stream-bin[400000+4000]
type=1400 audit(1458799164.583:55): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20004 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458799164.583:56): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=20004 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
traps: stream-bin[20008] trap invalid opcode ip:401dec sp:7ffcc2a74c30 error:0 in stream-bin[400000+4000]
traps: stream-bin[20015] trap invalid opcode ip:401dec sp:7ffca60a9a50 error:0 in stream-bin[400000+4000]
traps: stream-bin[20023] trap invalid opcode ip:401dec sp:7fffa7979950 error:0 in stream-bin[400000+4000]
traps: stream-bin[20030] trap invalid opcode ip:401dec sp:7ffdd95afcd0 error:0 in stream-bin[400000+4000]
traps: stream-bin[20038] trap invalid opcode ip:401dec sp:7fff511428f0 error:0 in stream-bin[400000+4000]
traps: stream-bin[20045] trap invalid opcode ip:401dec sp:7ffee3a2e670 error:0 in stream-bin[400000+4000]
traps: stream-bin[20052] trap invalid opcode ip:401dec sp:7ffccad06a10 error:0 in stream-bin[400000+4000]
traps: stream-bin[20060] trap invalid opcode ip:401dec sp:7ffebe3d28b0 error:0 in stream-bin[400000+4000]
traps: stream-bin[20067] trap invalid opcode ip:401dec sp:7ffc284c7d30 error:0 in stream-bin[400000+4000]
traps: tscp[20564] trap invalid opcode ip:401105 sp:7ffdd6094980 error:0 in tscp[400000+7000]
traps: tscp[20568] trap invalid opcode ip:401105 sp:7fff70def9c0 error:0 in tscp[400000+7000]
traps: tscp[20573] trap invalid opcode ip:401105 sp:7ffe381312a0 error:0 in tscp[400000+7000]
traps: tscp[20577] trap invalid opcode ip:401105 sp:7ffca631a210 error:0 in tscp[400000+7000]
traps: tscp[20582] trap invalid opcode ip:401105 sp:7fff9ef0a9f0 error:0 in tscp[400000+7000]
type=1400 audit(1458799657.583:57): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20695 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458799657.583:58): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=20695 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1400 audit(1458800003.607:59): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20903 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458800003.607:60): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=20903 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1400 audit(1458800643.615:61): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=21277 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458800643.615:62): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=21277 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1400 audit(1458801136.583:63): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=21828 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458801136.583:64): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=21828 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
crafty[22060]: segfault at 0 ip 00007f6f7aaa94e0 sp 00007fff3f6f3878 error 4 in libc-2.19.so[7f6f7aa38000+1bb000]
crafty[22064]: segfault at 0 ip 00007fbebe0c14e0 sp 00007ffc8180d638 error 4 in libc-2.19.so[7fbebe050000+1bb000]
crafty[22069]: segfault at 0 ip 00007f7fa0b814e0 sp 00007ffec5387ba8 error 4 in libc-2.19.so[7f7fa0b10000+1bb000]
type=1400 audit(1458804094.591:65): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=23925 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458804094.591:66): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=23925 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1400 audit(1458804440.679:67): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=24084 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458804440.679:68): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=24084 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
usb 3-5: USB disconnect, device number 2
usb 4-1: USB disconnect, device number 2
usb 3-5: new full-speed USB device number 3 using ohci-pci
usb 3-5: New USB device found, idVendor=046d, idProduct=c52b
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Receiver
usb 3-5: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.000B: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input2
input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:12.0/usb3/3-5/3-5:1.2/0003:046D:C52B.000B/input/input16
logitech-djdevice 0003:046D:C52B.000C: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:12.0-5:2
usb 4-1: new full-speed USB device number 3 using ohci-pci
usb 4-1: New USB device found, idVendor=046d, idProduct=c52b
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Receiver
usb 4-1: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.000F: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-1/input2
input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.2/0003:046D:C52B.000F/input/input17
logitech-djdevice 0003:046D:C52B.0010: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.0-1:1
usb 3-5: USB disconnect, device number 3
usb 4-1: USB disconnect, device number 3
usb 4-1: new full-speed USB device number 4 using ohci-pci
usb 4-1: New USB device found, idVendor=046d, idProduct=c52b
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Receiver
usb 4-1: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0013: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-1/input2
input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.2/0003:046D:C52B.0013/input/input18
logitech-djdevice 0003:046D:C52B.0014: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.0-1:1
usb 3-5: new full-speed USB device number 4 using ohci-pci
usb 3-5: New USB device found, idVendor=046d, idProduct=c52b
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Receiver
usb 3-5: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0017: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input2
input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:12.0/usb3/3-5/3-5:1.2/0003:046D:C52B.0017/input/input19
logitech-djdevice 0003:046D:C52B.0018: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:12.0-5:2
it87: Found IT8772F chip at 0xa30, revision 1
it87: Beeping is supported
ACPI Warning: 0x0000000000000a35-0x0000000000000a36 SystemIO conflicts with Region \SENP 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
conftest[10780]: segfault at 0 ip 00000000004005c0 sp 00007ffde7eabab0 error 4 in conftest[400000+1000]
conftest[10809]: segfault at 0 ip 00007f2db43e8216 sp 00007fffc056d758 error 4 in libc-2.19.so[7f2db42a8000+1bb000]
usb 3-5: USB disconnect, device number 4
usb 4-1: USB disconnect, device number 4
usb 3-5: new full-speed USB device number 5 using ohci-pci
usb 3-5: New USB device found, idVendor=046d, idProduct=c52b
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Receiver
usb 3-5: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.001B: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input2
input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:12.0/usb3/3-5/3-5:1.2/0003:046D:C52B.001B/input/input20
logitech-djdevice 0003:046D:C52B.001C: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:12.0-5:2
usb 4-1: new full-speed USB device number 5 using ohci-pci
usb 4-1: New USB device found, idVendor=046d, idProduct=c52b
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Receiver
usb 4-1: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.001F: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-1/input2
input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.2/0003:046D:C52B.001F/input/input21
logitech-djdevice 0003:046D:C52B.0020: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.0-1:1
usb 3-5: USB disconnect, device number 5
usb 4-1: USB disconnect, device number 5
usb 4-1: new full-speed USB device number 6 using ohci-pci
usb 4-1: New USB device found, idVendor=046d, idProduct=c52b
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Receiver
usb 4-1: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0023: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-1/input2
input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.2/0003:046D:C52B.0023/input/input22
logitech-djdevice 0003:046D:C52B.0024: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.0-1:1
usb 3-5: new full-speed USB device number 6 using ohci-pci
usb 3-5: New USB device found, idVendor=046d, idProduct=c52b
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Receiver
usb 3-5: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0027: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input2
input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:12.0/usb3/3-5/3-5:1.2/0003:046D:C52B.0027/input/input23
logitech-djdevice 0003:046D:C52B.0028: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:12.0-5:2
type=1400 audit(1458805968.587:69): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20179 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458805968.587:70): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=20179 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
usb 3-5: USB disconnect, device number 6
usb 4-1: USB disconnect, device number 6
usb 3-5: new full-speed USB device number 7 using ohci-pci
usb 3-5: New USB device found, idVendor=046d, idProduct=c52b
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Receiver
usb 3-5: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.002B: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input2
input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:12.0/usb3/3-5/3-5:1.2/0003:046D:C52B.002B/input/input24
logitech-djdevice 0003:046D:C52B.002C: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:12.0-5:2
usb 4-1: new full-speed USB device number 7 using ohci-pci
usb 4-1: New USB device found, idVendor=046d, idProduct=c52b
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Receiver
usb 4-1: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.002F: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-1/input2
input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.2/0003:046D:C52B.002F/input/input25
logitech-djdevice 0003:046D:C52B.0030: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.0-1:1
type=1400 audit(1458806412.691:71): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20402 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458806412.691:72): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=20402 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1400 audit(1458806559.599:73): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20465 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458806559.599:74): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=20465 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1400 audit(1458807003.595:75): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20618 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458807003.595:76): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=20618 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1400 audit(1458807398.639:77): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20730 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458807398.639:78): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=20730 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1400 audit(1458807496.583:79): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20770 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458807496.583:80): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=20770 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1400 audit(1458807891.687:81): apparmor="DENIED" operation="signal" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20869 comm="nm-dhcp-client." requested_mask="send" denied_mask="send" signal=term peer="/sbin/dhclient"
type=1400 audit(1458807891.687:82): apparmor="DENIED" operation="signal" profile="/sbin/dhclient" pid=20869 comm="nm-dhcp-client." requested_mask="receive" denied_mask="receive" signal=term peer="/usr/lib/NetworkManager/nm-dhcp-client.action"

Return To Multicore Suite Run 1 System Information